Aeronohvis — Fleet Management

📊 Dashboard

—

Total Aircraft

—

Online Now

—

Offline

—

Missions

Fleet Status

Recent Missions

🚁 Aircraft

📡 Live Telemetry

Select Aircraft

📡

Select an aircraft to view live telemetry

🗺️ Missions

📖 Setup Guide — DJI Pilot 2 Connection

ℹ️ This page contains the exact values to enter in DJI Pilot 2 → Settings → About → Cloud Services on your RC Plus 2 controller. Tap any value to copy it.

📡 Step-by-step: Connect Matrice 4T to Aeronohvis

1

Open DJI Pilot 2 on the RC Plus 2

Power on the RC Plus 2 with the Matrice 4T paired. Open DJI Pilot 2, tap the hamburger menu (≡) in the top-left, then go to Settings → About → Cloud services configuration.

2

Enter the Platform URL

Under Platform URL (sometimes labelled “Server address” or “3rd-party cloud services URL”), enter:

Platform URL

https://aeronohvis.com 📋

DJI Pilot 2 will immediately call /api/v1/manage/workspaces to verify connectivity. The workspace list will appear in the aircraft app if the URL is correct.

3

Enter MQTT broker settings

Under MQTT configuration enter:

MQTT Broker host	aeronohvis.com 📋
Port	8883 📋 (TLS/SSL)
SSL / TLS	Enabled
Username	181757 📋
Password	1cb9a42c4c918e38f14b1d78eaeec99 📋

⚠️ The Username is your DJI App ID and the Password is your DJI App Key. These are set in .env on the server and validated by the MQTT auth hook. Do not share these.

4

Enter the DJI App credentials

Under APP ID / App Key / App License (required to unlock the DJI SDK):

App ID	181757 📋
App Key	1cb9a42c4c918e38f14b1d78eaeec99 📋
App License	lyp0YtDwVzIZWq/O8sg… 📋

5

Connect and bind the aircraft

Tap Connect. DJI Pilot 2 will:
1. Call GET /api/v1/manage/workspaces — select Aeronohvis Main 2. Call POST /api/v1/manage/workspaces/{id}/devices/{sn}/bind — registers the Matrice 4T 3. Start publishing telemetry to MQTT topic thing/product/{sn}/osd

Once bound, the aircraft appears on the Aircraft page and live telemetry is available on the Live Telemetry page.

6

Live video streaming (optional)

To push live video from the Matrice 4T to the platform, configure the RTMP push URL in DJI Pilot 2 → Camera → Live Stream:

Protocol	RTMP
Push URL	rtmp://aeronohvis.com:1935/live/ 📋
Stream key	Your aircraft serial number (SN)

HLS playback URL: https://aeronohvis.com/live/{SN}/index.m3u8

🔌 Quick Reference Card

Platform URL	https://aeronohvis.com 📋
MQTT Host	aeronohvis.com 📋
MQTT Port (TLS)	8883 📋
MQTT WebSocket Port	8083 📋
MQTT Username (App ID)	181757 📋
MQTT Password (App Key)	1cb9a42c4c918e38f14b1d78eaeec99 📋
App ID	181757 📋
App Key	1cb9a42c4c918e38f14b1d78eaeec99 📋
RTMP Ingest	rtmp://aeronohvis.com:1935/live/ 📋
API Docs	/api/docs

🗂️ Workspaces